3 Point Trinity Stilt - 60mm/2.36" point to point

Kiln stilts are used for glazed, low-fire, or earthenware firings to prevent the glaze from adhering to the kiln shelf. Rather than placing glazed bisque directly on the shelf, stilts support the piece and keep it from sticking during firing.

Kilncor kiln stilts are manufactured using a proprietary hot-press mold sintering process with durable ceramic refractory material for a dense, stable & high-strength body. The stilt points are formed from a high-temperature, high-strength alloy and precision machined center ground for durability and consistency. Designed to withstand numerous repeated firings, Kilncor stilts provide reliable support and durability while leaving minimal contact marks after firing.

The 60 mm 3-point stilts are designed to handle a wide variety of bisque shapes—from flat-bottomed pieces to irregular forms—this stilt is ideal for supporting plates, dishes, mugs, and similar ware. When stilting, ensure the points sit just inside the foot ring or lip of the bottom. Avoid using an undersized stilt; for example, a five-inch plate should be supported by at least a three- to four-inch stilt. Using a stilt that’s too small can cause pieces to tilt or slide into others.

These stilts are rated for use up to Cone 10, offering excellent performance for a wide range of firing temperatures.

Perfect for use in:

• Paint-your-own pottery studios
• School kilns
• Production and commercial studios
• Any ceramic kiln — gas or electric